之前尝试用swarm部署redis集群时网上看了很多帖子，发现大多数都是单机集群，也就是在一个服务器上启多个redis容器，然后进入其中一个容器执行redis搭建，经过研究，我实现了只需要通过docker-compose.yml文件和一个启动命令就完成redis分布式部署的方式，让其分别部署在不同机器上，并实现集群搭建。
环境准备
四台虚拟机
- 192.168.2.38（管理节点）
- 192.168.2.81（工作节点）
- 192.168.2.100（工作节点）
- 192.168.2.102（工作节点）
时间同步
每台机器都执行
|
1
2
3
4
5
6
7
8
|
yum install -y ntpcat <<EOF>>/var/spool/cron/root00 12 * * * /usr/sbin/ntpdate -u ntp1.aliyun.com && /usr/sbin/hwclock -wEOF##查看计划任务crontab -l##手动执行/usr/sbin/ntpdate -u ntp1.aliyun.com && /usr/sbin/hwclock -w |
Docker
安装Docker
|
1
|
curl -sSL https://get.daocloud.io/docker | sh |
启动docker
|
1
|
sudo systemctl start docker |
搭建Swarm集群
打开防火墙(Swarm需要)
管理节点打开2377
|
1
2
|
# managerfirewall-cmd --zone=public --add-port=2377/tcp --permanent |
所有节点打开以下端口
|
1
2
3
4
5
|
# 所有nodefirewall-cmd --zone=public --add-port=7946/tcp --permanentfirewall-cmd --zone=public --add-port=7946/udp --permanentfirewall-cmd --zone=public --add-port=4789/tcp --permanentfirewall-cmd --zone=public --add-port=4789/udp --permanent |
所有节点重启防火墙
|
1
2
3
|
# 所有nodefirewall-cmd --reloadsystemctl restart docker |
图个方便可以直接关闭防火墙
创建Swarm
|
1
|
docker swarm init --advertise-addr your_manager_ip |
查看join-token
|
1
2
3
4
5
6
|
[root@manager ~]# docker swarm join-token workerTo add a worker to this swarm, run the following command: docker swarm join --token SWMTKN-1-51b7t8whxn8j6mdjt5perjmec9u8qguxq8tern9nill737pra2-ejc5nw5f90oz6xldcbmrl2ztu 192.168.2.61:2377[root@manager ~]# |
加入Swarm
|
1
2
3
4
5
|
docker swarm join --token SWMTKN-1-51b7t8whxn8j6mdjt5perjmec9u8qguxq8tern9nill737pra2-ejc5nw5f90oz6xldcbmrl2ztu192.168.2.38:2377#查看节点docker node ls |
服务约束
添加label
|
1
2
3
4
|
sudo docker node update --label-add redis1=true 管理节点名称sudo docker node update --label-add redis2=true 工作节点名称sudo docker node update --label-add redis3=true 工作节点名称sudo docker node update --label-add redis4=true 工作节点名称 |
单机集群
弊端：容器都部署在一个机器上，机器挂了，就全挂了。
创建容器
Tips：这里可以写个脚本启动，因为这种方式不常用，这里就不写那个脚本了
|
1
2
3
4
5
6
|
docker create --name redis-node1 --net host -v /data/redis-data/node1:/data redis --cluster-enabled yes --cluster-config-file nodes-node-1.conf --port 6379docker create --name redis-node2 --net host -v /data/redis-data/node2:/data redis --cluster-enabled yes --cluster-config-file nodes-node-2.conf --port 6380docker create --name redis-node3 --net host -v /data/redis-data/node3:/data redis --cluster-enabled yes --cluster-config-file nodes-node-3.conf --port 6381docker create --name redis-node4 --net host -v /data/redis-data/node4:/data redis --cluster-enabled yes --cluster-config-file nodes-node-4.conf --port 6382docker create --name redis-node5 --net host -v /data/redis-data/node5:/data redis --cluster-enabled yes --cluster-config-file nodes-node-5.conf --port 6383docker create --name redis-node6 --net host -v /data/redis-data/node6:/data redis --cluster-enabled yes --cluster-config-file nodes-node-6.conf --port 6384 |
启动容器
|
1
|
docker start redis-node1 redis-node2 redis-node3 redis-node4 redis-node5 redis-node6 |
进入容器启动集群
|
1
2
3
4
5
|
# 进入其中一个节点docker exec -it redis-node1 /bin/bash# 创建集群redis-cli --cluster create 192.168.2.38:6379 192.168.2.38:6380 192.168.2.38:6381 192.168.2.38:6382 192.168.2.38:6383 192.168.2.38:6384 --cluster-replicas 1# --cluster-replicas 1 一比一，一主一从 |
分布式集群
redis集群至少需要3个主节点，所以这里搭建三主三从的集群，由于只有4台机器，所以在脚本中把前三个节点放到一台机器上了。
部署
在swarm集群的Manager节点中创建
|
1
2
3
|
mkdir /root/redis-swarmcd /root/redis-swarmvi docker-compose.yml |
docker compose.yml
说明：
- 前6个服务为redis节点，最后一个redis-start是用于创建集群，利用redis-cli客户端搭建集群，该服务搭建完redis集群后会自动停止运行。
- redis-start需要等待前6个redis节点的执行完毕才能创建集群，因此需要用到脚本wait-for-it.sh
- 由于redis-cli --cluster create不支持网络别名，所以另写脚本redis-start.sh
使用这套脚本同样可以单机部署集群，只需要在启动时不使用swarm启动就可以了，然后把docker-compose.yml中的网络模式driver: overlay给注释掉即可
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
|
version: '3.7'services: redis-node1: image: redis hostname: redis-node1 ports: - 6379:6379 networks: - redis-swarm volumes: - "node1:/data" command: redis-server --cluster-enabled yes --cluster-config-file nodes-node-1.conf deploy: mode: replicated replicas: 1 resources: limits: # cpus: '0.001' memory: 5120M reservations: # cpus: '0.001' memory: 512M placement: constraints: - node.role==manager redis-node2: image: redis hostname: redis-node2 ports: - 6380:6379 networks: - redis-swarm volumes: - "node2:/data" command: redis-server --cluster-enabled yes --cluster-config-file nodes-node-2.conf deploy: mode: replicated replicas: 1 resources: limits: # cpus: '0.001' memory: 5120M reservations: # cpus: '0.001' memory: 512M placement: constraints: - node.role==manager redis-node3: image: redis hostname: redis-node3 ports: - 6381:6379 networks: - redis-swarm volumes: - "node3:/data" command: redis-server --cluster-enabled yes --cluster-config-file nodes-node-3.conf deploy: mode: replicated resources: limits: # cpus: '0.001' memory: 5120M reservations: # cpus: '0.001' memory: 512M replicas: 1 placement: constraints: - node.role==manager redis-node4: image: redis hostname: redis-node4 ports: - 6382:6379 networks: - redis-swarm volumes: - "node4:/data" command: redis-server --cluster-enabled yes --cluster-config-file nodes-node-4.conf deploy: mode: replicated replicas: 1 resources: limits: # cpus: '0.001' memory: 5120M reservations: # cpus: '0.001' memory: 512M placement: constraints: - node.labels.redis2==true redis-node5: image: redis hostname: redis-node5 ports: - 6383:6379 networks: - redis-swarm volumes: - "node5:/data" command: redis-server --cluster-enabled yes --cluster-config-file nodes-node-5.conf deploy: mode: replicated replicas: 1 resources: limits: # cpus: '0.001' memory: 5120M reservations: # cpus: '0.001' memory: 512M placement: constraints: - node.labels.redis3==true redis-node6: image: redis hostname: redis-node6 ports: - 6384:6379 networks: - redis-swarm volumes: - "node6:/data" command: redis-server --cluster-enabled yes --cluster-config-file nodes-node-6.conf deploy: mode: replicated replicas: 1 resources: limits: # cpus: '0.001' memory: 5120M reservations: # cpus: '0.001' memory: 512M placement: constraints: - node.labels.redis4==true redis-start: image: redis hostname: redis-start networks: - redis-swarm volumes: - "$PWD/start:/redis-start" depends_on: - redis-node1 - redis-node2 - redis-node3 - redis-node4 - redis-node5 - redis-node6 command: /bin/bash -c "chmod 777 /redis-start/redis-start.sh && chmod 777 /redis-start/wait-for-it.sh && /redis-start/redis-start.sh" deploy: restart_policy: condition: on-failure delay: 5s max_attempts: 5 placement: constraints: - node.role==managernetworks: redis-swarm: driver: overlayvolumes: node1: node2: node3: node4: node5: node6: |
wait-for-it.sh
|
1
2
3
|
mkdir /root/redis-swarm/startvi wait-for-it.shvi redis-start.sh |
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
|
#!/usr/bin/env bash# Use this script to test if a given TCP host/port are availablecmdname=$(basename $0)echoerr() { if [[ $QUIET -ne 1 ]]; then echo "$@" 1>&2; fi }usage(){ cat << USAGE >&2Usage: $cmdname host:port [-s] [-t timeout] [-- command args] -h HOST | --host=HOST Host or IP under test -p PORT | --port=PORT TCP port under test Alternatively, you specify the host and port as host:port -s | --strict Only execute subcommand if the test succeeds -q | --quiet Don't output any status messages -t TIMEOUT | --timeout=TIMEOUT Timeout in seconds, zero for no timeout -- COMMAND ARGS Execute command with args after the test finishesUSAGE exit 1}wait_for(){ if [[ $TIMEOUT -gt 0 ]]; then echoerr "$cmdname: waiting $TIMEOUT seconds for $HOST:$PORT" else echoerr "$cmdname: waiting for $HOST:$PORT without a timeout" fi start_ts=$(date +%s) while : do (echo > /dev/tcp/$HOST/$PORT) >/dev/null 2>&1 result=$? if [[ $result -eq 0 ]]; then end_ts=$(date +%s) echoerr "$cmdname: $HOST:$PORT is available after $((end_ts - start_ts)) seconds" break fi sleep 1 done return $result}wait_for_wrapper(){ # In order to support SIGINT during timeout: http://unix.stackexchange.com/a/57692 if [[ $QUIET -eq 1 ]]; then timeout $TIMEOUT $0 --quiet --child --host=$HOST --port=$PORT --timeout=$TIMEOUT & else timeout $TIMEOUT $0 --child --host=$HOST --port=$PORT --timeout=$TIMEOUT & fi PID=$! trap "kill -INT -$PID" INT wait $PID RESULT=$? if [[ $RESULT -ne 0 ]]; then echoerr "$cmdname: timeout occurred after waiting $TIMEOUT seconds for $HOST:$PORT" fi return $RESULT}# process argumentswhile [[ $# -gt 0 ]]do case "$1" in *:* ) hostport=(${1//:/ }) HOST=${hostport[0]} PORT=${hostport[1]} shift 1 ;; --child) CHILD=1 shift 1 ;; -q | --quiet) QUIET=1 shift 1 ;; -s | --strict) STRICT=1 shift 1 ;; -h) HOST="$2" if [[ $HOST == "" ]]; then break; fi shift 2 ;; --host=*) HOST="${1#*=}" shift 1 ;; -p) PORT="$2" if [[ $PORT == "" ]]; then break; fi shift 2 ;; --port=*) PORT="${1#*=}" shift 1 ;; -t) TIMEOUT="$2" if [[ $TIMEOUT == "" ]]; then break; fi shift 2 ;; --timeout=*) TIMEOUT="${1#*=}" shift 1 ;; --) shift CLI="$@" break ;; --help) usage ;; *) echoerr "Unknown argument: $1" usage ;; esacdoneif [[ "$HOST" == "" || "$PORT" == "" ]]; then echoerr "Error: you need to provide a host and port to test." usagefiTIMEOUT=${TIMEOUT:-15}STRICT=${STRICT:-0}CHILD=${CHILD:-0}QUIET=${QUIET:-0}if [[ $CHILD -gt 0 ]]; then wait_for RESULT=$? exit $RESULTelse if [[ $TIMEOUT -gt 0 ]]; then wait_for_wrapper RESULT=$? else wait_for RESULT=$? fifiif [[ $CLI != "" ]]; then if [[ $RESULT -ne 0 && $STRICT -eq 1 ]]; then echoerr "$cmdname: strict mode, refusing to execute subprocess" exit $RESULT fi exec $CLIelse exit $RESULTfi |
redis-start.sh
getent hosts xxx查看主机中/etc/hosts域名映射的IP
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
|
cd /redis-start/bash wait-for-it.sh redis-node1:6379 --timeout=0bash wait-for-it.sh redis-node2:6379 --timeout=0bash wait-for-it.sh redis-node3:6379 --timeout=0bash wait-for-it.sh redis-node4:6379 --timeout=0bash wait-for-it.sh redis-node5:6379 --timeout=0bash wait-for-it.sh redis-node6:6379 --timeout=0echo 'redis-cluster begin'echo 'yes' | redis-cli --cluster create --cluster-replicas 1 \`getent hosts redis-node1 | awk '{ print $1 ":6379" }'` \`getent hosts redis-node2 | awk '{ print $1 ":6379" }'` \`getent hosts redis-node3 | awk '{ print $1 ":6379" }'` \`getent hosts redis-node4 | awk '{ print $1 ":6379" }'` \`getent hosts redis-node5 | awk '{ print $1 ":6379" }'` \`getent hosts redis-node6 | awk '{ print $1 ":6379" }'`echo 'redis-cluster end' |
启动
目录结构
|
1
2
3
4
|
├── docker-compose.yml└── start ├── redis-start.sh └── wait-for-it.sh |
swarm管理节点执行
|
1
2
|
cd /root/redis-swarmdocker stack deploy -c docker-compose.yml redis_cluster |
查看redis-start服务日志，如下即为启动成功
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
|
redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | wait-for-it.sh: waiting for redis-node1:6379 without a timeoutredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | wait-for-it.sh: redis-node1:6379 is available after 18 secondsredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | wait-for-it.sh: waiting for redis-node2:6379 without a timeoutredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | wait-for-it.sh: redis-node2:6379 is available after 13 secondsredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | wait-for-it.sh: waiting for redis-node3:6379 without a timeoutredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | wait-for-it.sh: redis-node3:6379 is available after 0 secondsredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | wait-for-it.sh: waiting for redis-node4:6379 without a timeoutredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | wait-for-it.sh: redis-node4:6379 is available after 0 secondsredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | wait-for-it.sh: waiting for redis-node5:6379 without a timeoutredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | wait-for-it.sh: redis-node5:6379 is available after 0 secondsredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | wait-for-it.sh: waiting for redis-node6:6379 without a timeoutredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | wait-for-it.sh: redis-node6:6379 is available after 0 secondsredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | redis-cluster beginredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | >>> Performing hash slots allocation on 12 nodes...redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | Master[0] -> Slots 0 - 2730redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | Master[1] -> Slots 2731 - 5460redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | Master[2] -> Slots 5461 - 8191redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | Master[3] -> Slots 8192 - 10922redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | Master[4] -> Slots 10923 - 13652redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | Master[5] -> Slots 13653 - 16383redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | Adding replica 10.0.5.6:6379 to 10.0.5.17:6379redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | Adding replica 10.0.5.9:6379 to 10.0.5.16:6379redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | Adding replica 10.0.5.8:6379 to 10.0.5.18:6379redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | Adding replica 10.0.5.12:6379 to 10.0.5.19:6379redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | Adding replica 10.0.5.11:6379 to 10.0.5.3:6379redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | Adding replica 10.0.5.5:6379 to 10.0.5.2:6379redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | M: 6ce90be6daabc0c700471d03deb3c6bd88c9f0e1 10.0.5.17:6379redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | slots:[0-2730] (2731 slots) masterredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | M: 6ce90be6daabc0c700471d03deb3c6bd88c9f0e1 10.0.5.16:6379redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | slots:[2731-5460] (2730 slots) masterredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | M: ea9b45ec64c08c17283239f8b8e5405b2d182428 10.0.5.18:6379redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | slots:[5461-8191] (2731 slots) masterredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | M: ea9b45ec64c08c17283239f8b8e5405b2d182428 10.0.5.19:6379redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | slots:[8192-10922] (2731 slots) masterredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | M: 935c177308232de05b5483776478020de51bc578 10.0.5.3:6379redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | slots:[10923-13652] (2730 slots) masterredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | M: 935c177308232de05b5483776478020de51bc578 10.0.5.2:6379redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | slots:[13653-16383] (2731 slots) masterredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | S: 1c99e42bcfb28a9fe72952d4e4cc5cd88aded0f9 10.0.5.5:6379redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | replicates 935c177308232de05b5483776478020de51bc578redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | S: 1c99e42bcfb28a9fe72952d4e4cc5cd88aded0f9 10.0.5.6:6379redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | replicates 6ce90be6daabc0c700471d03deb3c6bd88c9f0e1redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | S: 73cf232f232e83126f058cc01458df11146d8537 10.0.5.9:6379redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | replicates 6ce90be6daabc0c700471d03deb3c6bd88c9f0e1redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | S: 73cf232f232e83126f058cc01458df11146d8537 10.0.5.8:6379redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | replicates ea9b45ec64c08c17283239f8b8e5405b2d182428redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | S: ca3c50899d6deb04e296c542cd485791fb3e8922 10.0.5.12:6379redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | replicates ea9b45ec64c08c17283239f8b8e5405b2d182428redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | S: ca3c50899d6deb04e296c542cd485791fb3e8922 10.0.5.11:6379redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | replicates 935c177308232de05b5483776478020de51bc578redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | Can I set the above configuration? (type 'yes' to accept): >>> Nodes configuration updatedredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | >>> Assign a different config epoch to each noderedis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | >>> Sending CLUSTER MEET messages to join the clusterredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | Waiting for the cluster to joinredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | .redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | >>> Performing Cluster Check (using node 10.0.5.17:6379)redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | M: 6ce90be6daabc0c700471d03deb3c6bd88c9f0e1 10.0.5.17:6379redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | slots:[0-5460] (5461 slots) masterredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | 1 additional replica(s)redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | S: ca3c50899d6deb04e296c542cd485791fb3e8922 10.0.5.12:6379redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | slots: (0 slots) slaveredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | replicates 935c177308232de05b5483776478020de51bc578redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | M: ea9b45ec64c08c17283239f8b8e5405b2d182428 10.0.5.19:6379redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | slots:[5461-10922] (5462 slots) masterredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | 1 additional replica(s)redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | M: 935c177308232de05b5483776478020de51bc578 10.0.5.3:6379redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | slots:[10923-16383] (5461 slots) masterredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | 1 additional replica(s)redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | S: 1c99e42bcfb28a9fe72952d4e4cc5cd88aded0f9 10.0.5.6:6379redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | slots: (0 slots) slaveredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | replicates 6ce90be6daabc0c700471d03deb3c6bd88c9f0e1redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | S: 73cf232f232e83126f058cc01458df11146d8537 10.0.5.9:6379redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | slots: (0 slots) slaveredis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | replicates ea9b45ec64c08c17283239f8b8e5405b2d182428redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | [OK] All nodes agree about slots configuration.redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | >>> Check for open slots...redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | >>> Check slots coverage...redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | [OK] All 16384 slots covered.redis-swarm_redis-start.1.6xawjqf5shfw@hyx-test3 | redis-cluster end |
撤销部署
|
1
|
docker stack rm redis_cluster |
如果需要重新部署集群，redis集群为了保证数据统一，需要清除数据卷。
|
1
2
|
# 每个节点都需要执行docker volume prune |
测试
进入其中一个节点容器，依次查看集群信息
|
1
2
|
docker exec -it xxx bashredis-cli -c -h redis-node1 info |
测试读写数据
测试其中一个主节点宕机，这里删除了主节点1，节点1对应的从节点是节点4，节点1宕机后节点4成为主节点
|
1
2
3
4
5
6
7
|
docker service rm redis-swarm_redis-node1# 查看root@redis-node2:/data# redis-cli -c -h redis-node1Could not connect to Redis at redis-node1:6379: Name or service not knownnot connected> root@redis-node2:/data# redis-cli -c -h redis-node4redis-node4:6379> info |
问题
|
1
|
redis-cli --cluster create redis-node1:6379 ...省略 |
在容器中使用redis-cli创建集群时，无法使用容器名创建，只能使用容器的ip，因为redis-cli对别名不支持
脚本下载+快速启动
链接: https://pan.baidu.com/s/18_YS9ng29e31Az_HBzBC1w?pwd=sp8w
提取码: sp8w
到此这篇关于docker swarm快速部署redis分布式集群的详细过程的文章就介绍到这了,更多相关docker swarm部署redis内容请搜索服务器之家以前的文章或继续浏览下面的相关文章希望大家以后多多支持服务器之家！
原文链接：https://www.cnblogs.com/hyx1229/p/16826211.html
