服务器之家：专注于VPS、云服务器配置技术及软件下载分享
分类导航

云服务器|WEB服务器|FTP服务器|邮件服务器|虚拟主机|服务器安全|DNS服务器|服务器知识|Nginx|IIS|Tomcat|

服务器之家 - 服务器技术 - 服务器知识 - docker machine安装极狐gitlab的过程详解

docker machine安装极狐gitlab的过程详解

2022-11-07 17:59leffss 服务器知识

这篇文章主要介绍了docker machine安装极狐gitlab的相关知识，本文给大家介绍的非常详细，对大家的学习或工作具有一定的参考借鉴价值,需要的朋友可以参考下

1. 环境信息

1.1 主机信息

主机 用途
10.10.10.60 极狐gitlab

1.2 配置信息

?
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
[root@localhost ~]# cat /etc/centos-release
CentOS Linux release 7.9.2009 (Core)
[root@localhost ~]#
[root@localhost ~]# uname -r
3.10.0-1160.el7.x86_64
[root@localhost ~]#
[root@localhost ~]# free -m
              total        used        free      shared  buff/cache   available
Mem:           8004         208        7482           8         313        7548
Swap:          3967           0        3967
[root@localhost ~]#
[root@localhost ~]# lscpu
Architecture:          x86_64
CPU op-mode(s):        32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                2
On-line CPU(s) list:   0,1
Thread(s) per core:    1
Core(s) per socket:    2
Socket(s):             1
NUMA node(s):          1
Vendor ID:             GenuineIntel
CPU family:            6
Model:                 141
Model name:            11th Gen Intel(R) Core(TM) i7-11800H @ 2.30GHz
Stepping:              1
CPU MHz:               2304.002
BogoMIPS:              4608.00
Hypervisor vendor:     VMware
Virtualization type:   full
L1d cache:             48K
L1i cache:             32K
L2 cache:              1280K
L3 cache:              24576K
NUMA node0 CPU(s):     0,1
Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ss ht syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon rep_good nopl xtopology tsc_reliable nonstop_tsc eagerfpu pni pclmulqdq ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand hypervisor lahf_lm abm 3dnowprefetch invpcid_single ssbd ibrs ibpb stibp ibrs_enhanced fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid avx512f avx512dq rdseed adx smap avx512ifma clflushopt clwb avx512cd sha_ni avx512bw avx512vl xsaveopt xsavec xgetbv1 arat avx512vbmi umip pku ospke avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg avx512_vpopcntdq movdiri movdir64b md_clear spec_ctrl intel_stibp flush_l1d arch_capabilities
[root@localhost ~]#

1.3 环境初始化

?
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
echo "设置时钟同步"
yum install -y chrony
systemctl start chronyd.service
systemctl enable chronyd.service
 
echo "关闭防火墙"
systemctl stop firewalld
systemctl disable firewalld
 
echo "关闭 selinux"
setenforce 0
sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config
getenforce
 
echo "优化 ssh 登录速度"
sed -i 's/#UseDNS yes/UseDNS no/g' /etc/ssh/sshd_config
systemctl restart sshd
 
echo "安装基础软件 lrzsz, epel-release"
yum install epel-release lrzsz -y

1.4 升级内核

?
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org
# 安装ELRepo
rpm -Uvh http://www.elrepo.org/elrepo-release-7.0-3.el7.elrepo.noarch.rpm
# 载入elrepo-kernel元数据
yum --disablerepo=\* --enablerepo=elrepo-kernel repolist
# 查看可用的rpm包
yum --disablerepo=\* --enablerepo=elrepo-kernel list kernel*
# 安装长期支持版本的kernel
yum --disablerepo=\* --enablerepo=elrepo-kernel install -y kernel-lt.x86_64
# 删除旧版本工具包
yum remove kernel-tools-libs.x86_64 kernel-tools.x86_64 -y
# 安装新版本工具包
yum --disablerepo=\* --enablerepo=elrepo-kernel install -y kernel-lt-tools.x86_64
 
#查看默认启动顺序
awk -F\' '$1=="menuentry " {print $2}' /etc/grub2.cfg 
 
#默认启动的顺序是从0开始，新内核是从头插入（目前位置在0，而4.4.4的是在1），所以需要选择0。
grub2-set-default 0
 
reboot

当前最新稳定内核版本 CentOS Linux (5.4.180-1.el7.elrepo.x86_64) 7 (Core)

1.5 安装 docker

参考：Get Docker | Docker Documentation 或者

?
1
2
3
4
5
6
7
8
echo "
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1" >> /etc/sysctl.conf
sysctl -p
 
curl https://releases.rancher.com/install-docker/19.03.sh | sh
systemctl enable docker

设置国内源

?
1
2
3
4
5
vi /etc/docker/daemon.json
{
    "registry-mirrors": ["https://hccwwfjl.mirror.aliyuncs.com"]
}
systemctl restart docker

其他源：http://hub-mirror.c.163.com，建议用这个 163 的

1.6 安装 docker machine

参考：Testing Environment | GitLab

?
1
2
3
4
5
$ curl -L https://github.com/docker/machine/releases/download/v0.16.2/docker-machine-`uname -s`-`uname -m` >/usr/local/bin/docker-machine && \
  chmod +x /usr/local/bin/docker-machine
 
$ docker-machine version
docker-machine version 0.16.2, build bd45ab13

2. 安装极狐gitlab

参考官方文档：Testing Environment | GitLab

2.1 获取可用的极狐gitlab镜像tags

?
1
2
$ curl https://version.gitlab.cn/api/v1/versions
[{"id":138,"version":"15.1.2","major":15,"minor":1,"created_at":"2022-07-18T08:56:08.077+08:00"},{"id":137,"version":"15.1.1","major":15,"minor":1,"created_at":"2022-07-04T21:40:13.500+08:00"},{"id":136,"version":"15.0.4","major":15,"minor":0,"created_at":"2022-07-04T20:49:12.275+08:00"},{"id":135,"version":"14.10.5","major":14,"minor":10,"created_at":"2022-07-04T20:48:53.544+08:00"},{"id":134,"version":"15.1.0","major":15,"minor":1,"created_at":"2022-06-29T08:48:24.417+08:00"},{"id":133,"version":"15.0.3","major":15,"minor":0,"created_at":"2022-06-21T11:34:56.890+08:00"},{"id":132,"version":"14.10.4","major":14,"minor":10,"created_at":"2022-06-09T00:38:44.427+08:00"},{"id":131,"version":"15.0.2","major":15,"minor":0,"created_at":"2022-06-09T00:38:35.091+08:00"},{"id":130,"version":"14.9.5","major":14,"minor":9,"created_at":"2022-06-09T00:38:25.486+08:00"},{"id":129,"version":"14.10.3","major":14,"minor":10,"created_at":"2022-06-09T00:38:20.119+08:00"},{"id":128,"version":"15.0.1","major":15,"minor":0,"created_at":"2022-06-09T00:37:57.686+08:00"},{"id":127,"version":"15.0.0","major":15,"minor":0,"created_at":"2022-05-30T14:47:01.074+08:00"},{"id":126,"version":"14.9.4","major":14,"minor":9,"created_at":"2022-05-16T10:20:15.342+08:00"},{"id":125,"version":"14.10.2","major":14,"minor":10,"created_at":"2022-05-16T10:20:05.693+08:00"},{"id":124,"version":"14.8.6","major":14,"minor":8,"created_at":"2022-05-11T09:38:30.199+08:00"},{"id":123,"version":"14.10.1","major":14,"minor":10,"created_at":"2022-05-11T09:38:25.259+08:00"},{"id":122,"version":"14.10.0","major":14,"minor":10,"created_at":"2022-04-28T10:55:42.550+08:00"},{"id":121,"version":"14.9.3","major":14,"minor":9,"created_at":"2022-04-15T15:27:32.220+08:00"},{"id":120,"version":"14.7.7","major":14,"minor":7,"created_at":"2022-04-07T23:33:06.372+08:00"},{"id":119,"version":"14.8.5","major":14,"minor":8,"created_at":"2022-04-07T20:10:25.222+08:00"},{"id":118,"version":"14.9.2","major":14,"minor":9,"created_at":"2022-04-07T18:05:01.894+08:00"},{"id":117,"version":"14.7.6","major":14,"minor":7,"created_at":"2022-04-01T11:05:38.177+08:00"},{"id":116,"version":"14.9.1","major":14,"minor":9,"created_at":"2022-03-30T15:02:25.234+08:00"},{"id":115,"version":"14.7.5","major":14,"minor":7,"created_at":"2022-03-30T07:06:00.278+08:00"},{"id":114,"version":"14.9.0","major":14,"minor":9,"created_at":"2022-03-28T15:14:45.356+08:00"}]

2.2 设置环境变量

?
1
2
3
4
5
export SSH_PORT=2222
export HTTP_PORT=8888
export VERSION=15.1.2
export ENV_NAME=gitlab-test-env
export CONTAINER_NAME=gitlab-test-14.7.3

2.3 创建 docker host

?
1
2
3
4
5
docker-machine create \
--virtualbox-cpu-count -1 \
--virtualbox-memory 4096 \
--virtualbox-disk-size 30000 \
--driver virtualbox $ENV_NAME

会出现以下报错

?
1
2
3
4
Creating CA: /root/.docker/machine/certs/ca.pem
Creating client certificate: /root/.docker/machine/certs/cert.pem
Running pre-create checks...
Error with pre-create check: "VBoxManage not found. Make sure VirtualBox is installed and VBoxManage is in the path"

原因是未安装 VirtualBox，解决方法如下

Linux_Downloads – Oracle VM VirtualBox

?
1
2
wget https://download.virtualbox.org/virtualbox/6.1.32/VirtualBox-6.1-6.1.32_149290_el7-1.x86_64.rpm
yum install -y VirtualBox-6.1-6.1.32_149290_el7-1.x86_64.rpm

必须使用 yum 安装 rpm 包，以便解决依赖

再次运行 docker-machine 创建命令，出现以下报错：

?
1
2
Running pre-create checks...
Error with pre-create check: "We support Virtualbox starting with version 5. Your VirtualBox install is \"WARNING: The vboxdrv kernel module is not loaded. Either there is no module\\n         available for the current kernel (5.4.180-1.el7.elrepo.x86_64) or it failed to\\n         load. Please recompile the kernel module and install it by\\n\\n           sudo /sbin/vboxconfig\\n\\n         You will not be able to start VMs until this problem is fixed.\\n6.1.32r149290\". Please upgrade at https://www.virtualbox.org"

按照提示执行命令 /sbin/vboxconfig

?
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
$ /sbin/vboxconfig
vboxdrv.sh: Stopping VirtualBox services.
vboxdrv.sh: Starting VirtualBox services.
vboxdrv.sh: Building VirtualBox kernel modules.
This system is currently not set up to build kernel modules.
Please install the gcc make perl packages from your distribution.
Please install the Linux kernel "header" files matching the current kernel
for adding new hardware support to the system.
The distribution packages containing the headers are probably:
    kernel-devel kernel-devel-5.4.180-1.el7.elrepo.x86_64
This system is currently not set up to build kernel modules.
Please install the gcc make perl packages from your distribution.
Please install the Linux kernel "header" files matching the current kernel
for adding new hardware support to the system.
The distribution packages containing the headers are probably:
    kernel-devel kernel-devel-5.4.180-1.el7.elrepo.x86_64
 
There were problems setting up VirtualBox.  To re-start the set-up process, run
  /sbin/vboxconfig
as root.  If your system is using EFI Secure Boot you may need to sign the
kernel modules (vboxdrv, vboxnetflt, vboxnetadp, vboxpci) before you can load
them. Please see your Linux system's documentation for more information.

根据提示执行

?
1
2
3
4
yum install -y gcc make perl
 
# 会提示找不到 kernel-devel-5.4.180-1.el7.elrepo.x86_64
yum install -y kernel-devel kernel-devel-5.4.180-1.el7.elrepo.x86_64

原因是前面我们升级了内核到 5.4，内核太新了，重新使用默认 3.10 内核

?
1
2
3
4
5
6
7
8
9
10
#查看默认启动顺序
$ awk -F\' '$1=="menuentry " {print $2}' /etc/grub2.cfg 
CentOS Linux (5.4.180-1.el7.elrepo.x86_64) 7 (Core)
CentOS Linux (3.10.0-1160.el7.x86_64) 7 (Core)
CentOS Linux (0-rescue-5fe30f5d6bc041278a5ab7b332967cb0) 7 (Core)
 
#默认启动的顺序是从0开始，所以需要选择1。
grub2-set-default 1
 
reboot

重启后执行 /sbin/vboxconfig

?
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
$ uname -r
3.10.0-1160.el7.x86_64
 
$ /sbin/vboxconfig
vboxdrv.sh: Stopping VirtualBox services.
vboxdrv.sh: Starting VirtualBox services.
vboxdrv.sh: Building VirtualBox kernel modules.
This system is currently not set up to build kernel modules.
Please install the Linux kernel "header" files matching the current kernel
for adding new hardware support to the system.
The distribution packages containing the headers are probably:
    kernel-devel kernel-devel-3.10.0-1160.el7.x86_64
This system is currently not set up to build kernel modules.
Please install the Linux kernel "header" files matching the current kernel
for adding new hardware support to the system.
The distribution packages containing the headers are probably:
    kernel-devel kernel-devel-3.10.0-1160.el7.x86_64
 
There were problems setting up VirtualBox.  To re-start the set-up process, run
  /sbin/vboxconfig
as root.  If your system is using EFI Secure Boot you may need to sign the
kernel modules (vboxdrv, vboxnetflt, vboxnetadp, vboxpci) before you can load
them. Please see your Linux system's documentation for more information.

根据提示执行

?
1
yum install -y kernel-devel kernel-devel-3.10.0-1160.el7.x86_64

再执行 /sbin/vboxconfig

?
1
2
3
4
$ /sbin/vboxconfig
vboxdrv.sh: Stopping VirtualBox services.
vboxdrv.sh: Starting VirtualBox services.
vboxdrv.sh: Building VirtualBox kernel modules.

成功编译进内核

再次执行 docker-machine，还是报错：

?
1
2
Running pre-create checks...
Error with pre-create check: "This computer doesn't have VT-X/AMD-v enabled. Enabling it in the BIOS is mandatory"

原因是 vm 未开启硬件虚拟化，关闭虚拟机，开启即可

图片此处省略

  • 勾选 虚拟化 Intel VT-X/EPT 或 AMD-V/RVI(V)

重启后再次运行 docker-machine，结果因为网络原因下载镜像失败

?
1
2
3
4
5
Running pre-create checks...
(gitlab-test-env) No default Boot2Docker ISO found locally, downloading the latest release...
(gitlab-test-env) Latest release for github.com/boot2docker/boot2docker is v19.03.12
(gitlab-test-env) Downloading /root/.docker/machine/cache/boot2docker.iso from https://github.com/boot2docker/boot2docker/releases/download/v19.03.12/boot2docker.iso...
Error with pre-create check: "Get https://github.com/boot2docker/boot2docker/releases/download/v19.03.12/boot2docker.iso: read tcp 10.10.10.60:38606->20.205.243.166:443: read: connection reset by peer"

解决方法很简单，先在合适网络下下载 https://github.com/boot2docker/boot2docker/releases/download/v19.03.12/boot2docker.iso，然后把 boot2docker.iso 放到目录 /root/.docker/machine/cache/ 下即可

再次运行 docker-machine

?
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
$ docker-machine create \
> --virtualbox-cpu-count -1 \
> --virtualbox-memory 4096 \
> --virtualbox-disk-size 30000 \
> --driver virtualbox $ENV_NAME
Running pre-create checks...
Creating machine...
(gitlab-test-env) Copying /root/.docker/machine/cache/boot2docker.iso to /root/.docker/machine/machines/gitlab-test-env/boot2docker.iso...
(gitlab-test-env) Creating VirtualBox VM...
(gitlab-test-env) Creating SSH key...
(gitlab-test-env) Starting the VM...
(gitlab-test-env) Check network to re-create if needed...
(gitlab-test-env) Found a new host-only adapter: "vboxnet0"
Error creating machine: Error in driver during machine creation: Error setting up host only network on machine start: /usr/bin/VBoxManage hostonlyif ipconfig vboxnet0 --ip 192.168.99.1 --netmask 255.255.255.0 failed:
VBoxManage: error: Code E_ACCESSDENIED (0x80070005) - Access denied (extended info not available)
VBoxManage: error: Context: "EnableStaticIPConfig(Bstr(pszIp).raw(), Bstr(pszNetmask).raw())" at line 242 of file VBoxManageHostonly.cpp

解决方法如下：

1. docker-machine ls 的所有计算机
2. 用 docker-machine rm -y <machineName> 删除它们
3. 用 VBoxManage list hostonlyifs 查找所有 host-only 以太网适配器
4. 用 VBoxManage hostonlyif remove <networkName> 逐个删除它们
5. 创建 /etc/vbox 文件夹
6. 写入文件 echo "* 0.0.0.0/0 ::/0" > /etc/vbox/networks.conf

这种解决方法可能会导致启动 docker 机器时 Waiting for an IP...会花费多一点时间

再次创建 host，正常运行了

?
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
$ docker-machine create \
> --virtualbox-cpu-count -1 \
> --virtualbox-memory 4096 \
> --virtualbox-disk-size 30000 \
> --driver virtualbox $ENV_NAME
Running pre-create checks...
Creating machine...
(gitlab-test-env) Copying /root/.docker/machine/cache/boot2docker.iso to /root/.docker/machine/machines/gitlab-test-env/boot2docker.iso...
(gitlab-test-env) Creating VirtualBox VM...
(gitlab-test-env) Creating SSH key...
(gitlab-test-env) Starting the VM...
(gitlab-test-env) Check network to re-create if needed...
(gitlab-test-env) Found a new host-only adapter: "vboxnet0"
(gitlab-test-env) Waiting for an IP...
Waiting for machine to be running, this may take a few minutes...
Detecting operating system of created instance...
Waiting for SSH to be available...
Detecting the provisioner...
Provisioning with boot2docker...
Copying certs to the local machine directory...
Copying certs to the remote machine...
Setting Docker configuration on the remote daemon...
Checking connection to Docker...
Docker is up and running!
To see how to connect your Docker Client to the Docker Engine running on this virtual machine, run: docker-machine env gitlab-test-env
 
$ docker-machine ls
NAME              ACTIVE   DRIVER       STATE     URL                         SWARM   DOCKER      ERRORS
gitlab-test-env   -        virtualbox   Running   tcp://192.168.99.100:2376           v19.03.12

2.4 连接到 docker host

?
1
eval "$(docker-machine env ${ENV_NAME})"

如果需要长期使用可以添加到配置文件：echo 'eval "$(docker-machine env gitlab-test-env)"' >> ~/.bash_profile

查看是否生效

?
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
docker info
Client:
 Debug Mode: false
 
Server:
 Containers: 0
  Running: 0
  Paused: 0
  Stopped: 0
 Images: 0
 Server Version: 19.03.12
 Storage Driver: overlay2
  Backing Filesystem: extfs
  Supports d_type: true
  Native Overlay Diff: true
 Logging Driver: json-file
 Cgroup Driver: cgroupfs
 Plugins:
  Volume: local
  Network: bridge host ipvlan macvlan null overlay
  Log: awslogs fluentd gcplogs gelf journald json-file local logentries splunk syslog
 Swarm: inactive
 Runtimes: runc
 Default Runtime: runc
 Init Binary: docker-init
 containerd version: 7ad184331fa3e55e52b890ea95e65ba581ae3429
 runc version: dc9208a3303feef5b3839f4323d9beb36df0a9dd
 init version: fec3683
 Security Options:
  seccomp
   Profile: default
 Kernel Version: 4.19.130-boot2docker
 Operating System: Boot2Docker 19.03.12 (TCL 10.1)
 OSType: linux
 Architecture: x86_64
 CPUs: 2
 Total Memory: 3.852GiB
 Name: gitlab-test-env
 ID: AFYU:KGWR:RTE4:FG6E:ZYSC:2TUX:CYRC:3RJW:KDUE:OPZM:KJL2:LMDR
 Docker Root Dir: /mnt/sda1/var/lib/docker
 Debug Mode: false
 Registry: https://index.docker.io/v1/
 Labels:
  provider=virtualbox
 Experimental: false
 Insecure Registries:
  127.0.0.0/8
 Live Restore Enabled: false
 Product License: Community Engine

可以看到 Name 是 gitlab-test-env，证明已生效

2.5 创建极狐gitlab容器

?
1
2
3
4
5
6
7
8
9
10
11
12
export IP=$(docker-machine ip $ENV_NAME)
 
docker run -d \
--env GITLAB_OMNIBUS_CONFIG="external_url 'http://$IP:$HTTP_PORT'; gitlab_rails['gitlab_shell_ssh_port'] = $SSH_PORT;" \
--hostname $IP \
-p $HTTP_PORT:$HTTP_PORT -p $SSH_PORT:22 \
--name $CONTAINER_NAME \
registry.gitlab.cn/omnibus/gitlab-jh:$VERSION
 
$ docker ps
CONTAINER ID        IMAGE                          COMMAND             CREATED             STATUS                                 PORTS                                                           NAMES
87d83d00755d        gitlab/gitlab-ee:14.7.3-ee.0   "/assets/wrapper"   3 minutes ago       Up About a minute (health: starting)   80/tcp, 443/tcp, 0.0.0.0:8888->8888/tcp, 0.0.0.0:2222->22/tcp   gitlab-test-14.7.3

2.6 访问极狐gitlab

首先获取 docker host 虚拟机 ip

?
1
2
3
4
5
$ echo $IP
192.168.99.100
 
# 获取 root 账号初始密码
docker exec ${CONTAINER_NAME} cat /etc/gitlab/initial_root_password

访问 http://192.168.99.100:8888 即可看到极狐gitlab页面

到此这篇关于docker machine安装极狐gitlab的文章就介绍到这了,更多相关docker安装gitlab内容请搜索服务器之家以前的文章或继续浏览下面的相关文章希望大家以后多多支持服务器之家！

原文链接：https://www.cnblogs.com/leffss/p/16492865.html

  • Docker
  • GitLab

    • 延伸 · 阅读

    精彩推荐
    最近更新
    编辑推荐
    阅读排行
    热门标签
    2008 　 443 　 2375 　 206 　 5480 　 1007 　 硬件冗余技术 　 网站备份 　 计划任务 　 FTP 　 服务器技术 　 NTP服务器地址 　 x86架构服务器 　 免费建站空间 　 服务器性能配置 　 服务器配置推荐 　 服务器硬件配置 　 企业级服务器配置 　 服务器配置怎么看 　 服务器变慢 　 3389端口 　 入站规则 　 服务器不稳定 　 网页游戏服务器 　 页游服务器 　 服务器托管商 　 云服务器托管 　 云镜像 　 服务器组成 　 分布式架构 　
    © 2019-2023 服务器之家(www.tuohang.net) 版权所有关于我们联系我们版权申明网站地图